Welcome!
JIHOO125 SK6812 ARDUINO SHIELD
WARNING: THERE ARE NO HEADER PINS IN THIS DUE TO PCBA ASSEMBLY NOT BEING ABLE TO AUTOMATICALLY SOLDER TH PARTS SO YOU NEED TO BUY AND PLACE 0.16' HEADER PINS BY YOURSELF. WHEN UPLOADING THE BOM, IT MIGHT SAY WS2812 SK6812. YOU MAY CHOOSE ANY SMD5050 4P ADDRESSABLE LEDS. FOR THIS EXAMPLE THE SK6812-B IS USED.
This is an Arduino shield PCB that's made using KiCad. Digital pin 8 is used as the pin for the LED chain.
The PCBA may be fully assembled using Economic PCBA from JLCPCB
(EXCEPT HEADER PINS).
There is a 100nF decoupling 0603 capacitor and a 330 ohm 0603 resistor.
You may download the files below.